imported>ChiEmpire |
imported>ChiEmpire |
| 第5行： |
第5行： |
| | 參數<code>native_name</code>不建議使用。請改用<code>alt_name</code>。 | | | 參數<code>native_name</code>不建議使用。請改用<code>alt_name</code>。 |
| }} | | }} |
| == 參數說明 ==
| |
|
| |
| 下表列出本信息框模板的參數項。<code>name</code>為必填，其它參數為選填。
| |
|
| |
| {| class="wikitable" style="width: 97%;"
| |
| ! style="width: 14%" | 參數 || 說明
| |
| |-
| |
| |<code>tablewidth</code> || 選填。信息框寬度，留空則預設為300px。
| |
| |-
| |
| |<code>name</code> || 必填。The official name of the protected area which will be displayed at the top of the infobox. In most cases this should be the same as the article name less any disambiguation. For example if the article title is [[Mount Washington (New Hampshire)]] then <code>name = Mount Washington</code>.
| |
| |-
| |
| |<code>alt_name</code> || 選填。其它名稱，例如在當地語言的名稱。
| |
| |-
| |
| |<code>iucn_category</code> || Strongly recommended. The [[World Commission on Protected Areas#IUCN Categories of Protected Area|IUCN]] category associated with the protected area. 只有填 Ia, Ib, II, III, IV, V, or VI 才有效。見[[#IUCN Categories|IUCN Categories]]。
| |
| |-
| |
| |<code>photo</code> || 圖像名稱。前面不用加File:。
| |
| |-
| |
| |<code>photo_width</code> || 圖像寬度。The default and maximum value is 284 pixels. Images with a horizontal orientation (landscape mode) will generally display well at the default setting. An image with vertical orientation (portrait mode) may need to be adjusted to 180 or 220 pixels. For example <code>photo_width = 200</code> and not <code>photo_width = 200px</code>.
| |
| |-
| |
| |<code>photo_caption</code> || 圖像說明文字。
| |
| |-
| |
| |<code>map</code> || The name of the map to be displayed. See [[#Map display methods|Map display methods]].
| |
| |-
| |
| |<code>relief</code> || 如選擇顯示地形圖，填上任何數值，例如1。此項目在使用XY坐標方法時無效。見[[#Map display methods|Map display methods]].
| |
| |-
| |
| |<code>map_width</code> || 地圖寬度。The default and maximum width is 284 pixels but usually the map should be much smaller. 例子：<code>map_width = 200</code>。'''請勿在數字加px'''。
| |
| |-
| |
| |<code>map_caption</code> || 地圖說明文字。
| |
| |-
| |
| |<code>locator_x</code><br/><code>locator_y</code> || Specify the position of the location marker on some types of maps. The coordinates of the marker in pixels based on a map width of 288 pixels. The template will scale these values for proper display.
| |
| |-
| |
| |<code>label</code> || Text that will display when the mouse pointer is over the marker. A text message will be displayed next to the marker if <code>label_position</code> is assigned a valid value other than <code>none</code>. If <code>label</code> is not specified then <code>name</code> is used.
| |
| |-
| |
| |<code>label_position</code> || Specifies the position of the label with respect to the marker. This is not functional when using the XY method for map display. Valid values are <code>left</code>, <code>right</code>, <code>top</code>, <code>bottom</code> and <code>none</code>. The default value is <code>none</code> which prevents the label from being displayed as visible text. See <code>label</code>.
| |
| |-
| |
| |<code>country</code> || 保護區所在之國家。
| |
| |-
| |
| |<code>location</code> || 保護區的位置。不要寫得十分仔細，例如美國填州、縣已足夠。如果在城市內就寫明州和該城市，如果橫跨多個縣則寫州即可。對於在其它國家的也如此類推。
| |
| |-
| |
| |<code>nearest_city</code> || Recommended if the area is not within a city. It could be a city with a major airport or a large gateway town where supplies and lodging are available.
| |
| |-
| |
| |<code>coordinates</code> || For the {{tl|Coord}} template. See [[#With no photograph or map|below]]. When this option is used <code>type</code>, <code>region</code>, <code>scale</code>, <code>source</code>, <code>format</code> and <code>display</code> fields are not functional but this data can be entered in the Coord template. The defaults should be <code>type:landmark</code> and <code>display:inline,title</code>. See [[#Coordinate syntax|below]].
| |
| |-
| |
| |<code>lat_d</code> || 緯度。This value can be specified as a [[Decimal degrees|decimal degree]] and when this format is used minutes and seconds should not be specified. See [[#Coordinate syntax|below]].
| |
| |-
| |
| |<code>lat_m</code> || 緯分
| |
| |-
| |
| |<code>lat_s</code> || 緯秒
| |
| |-
| |
| |<code>lat_NS</code> || N if north of the equator, S if south of the equator. Other values will be disregarded.
| |
| |-
| |
| |<code>long_d</code> || 經度。This value can be specified as a [[Decimal degrees|decimal degree]] and when this format is used minutes and seconds should not be specified. See [[#Coordinate syntax|below]].
| |
| |-
| |
| |<code>long_m</code> || 經分
| |
| |-
| |
| |<code>long_s</code> || 經秒
| |
| |-
| |
| |<code>long_EW</code> || E if East of the prime meridian, W if west of the prime meridian. Other values will be disregarded.
| |
| |-
| |
| |<code>coords_ref</code> || Can be used with either coordinate display method above. Strongly recommended. Specify a citation for the coordinates using {{nowrap|<code><nowiki><ref>...</ref></nowiki></code>}} tags.
| |
| |-
| |
| |<code>type</code> || The type of area. See [[PJ:GEO#type:T|type]] for valid values. Type sets the default map scale. If the default map scale is not appropriate consider adding a <code>scale</code> field. The default is <code>landmark</code>.
| |
| |-
| |
| |<code>scale</code> || Determines the zoom factor for external map websites. See [[PJ:GEO#scale:N|scale]]. The value is 1:10,000 for the default type which is <code>landmark</code>. Using <code>scale = 50000</code> will change the zoom to 1:50,000.
| |
| |-
| |
| |<code>region</code> || A country code. See [[ISO 3166-2:US]], [[ISO 3166-2]] and [[ISO_3166-1二位字母代码]]. For example US-OR is the code for Oregon. This computer readable code is recommended. It will not be displayed. See [[PJ:GEO#region:R|region]].
| |
| |-
| |
| |<code>source</code> || Source of the coordinate data. See [[PJ:GEO#source:S|source]]. For example [[Geographic Names Information System|gnis]] or [[U.S. National Geodetic Survey|ngs]], etc. Not all possible values are recognized.
| |
| |-
| |
| |<code>format</code> || Determines the format of the coordinate display. Valid values are <code>dms</code> for degrees, minutes and seconds, and <code>dec</code> for [[decimal degrees]]. The default currently is <code>dms</code>. There are ongoing discussions about which format should be used.
| |
| |-
| |
| |<code>display</code> || Determines where the coordinates will be displayed. Valid values are <code>inline</code> and <code>inline,title</code> and their variants. The default is <code>inline,title</code> and is recommended.
| |
| |-
| |
| |<code>area</code> || Area of the protected area. Usually in acres or square miles for US locations and hectares or square kilometres elsewhere. The {{tl|Convert}} template should be used. Very small areas might be specified in square feet, square yards or square metres.
| |
| <!--|-
| |
| |<code>area_ref</code> || Used with the area field above. Highly recommended. Specify the a citation for the area data using {{nowrap|<code><nowiki><ref>...</ref></nowiki></code>}} tags.
| |
| |-
| |
| -->
| |
| |-
| |
| |<code>established</code> || 保護區建立日期。For example congress established Yosemite National Park on October 1, 1890.
| |
| |-
| |
| |<code>visitation_num</code> || 最近某年的年度參觀人數，如有。
| |
| |-
| |
| |<code>visitation_year</code> || 上面參觀人數的年份
| |
| |-
| |
| |<code>visitation_ref</code> || 列出上面參觀人數的資料來源。Highly recommended. Specify the a citation for the visitation data using {{nowrap|<code><nowiki><ref>...</ref></nowiki></code>}} tags.
| |
| |-
| |
| |<code>governing_body</code> || 管理或擁有該保護區的部門、組織
| |
| |-
| |
| |<code>logo</code> || 標誌名稱。前面不用加File:。
| |
| |-
| |
| |<code>logosize</code> || 標誌寬度。
| |
| |-
| |
| |<code>logo_caption</code> || 標誌說明文字。
| |
| |-
| |
| |<code>world_heritage_site</code> || 獲指定為[[世界遗产]]的年份。只有少數保護區適用。
| |
| |-
| |
| |<code>url</code> || 官方網站。例如填： {{nowrap|<code><nowiki>http://www.example.org/</nowiki></code>}}
| |
| |}
| |
|
| |
| == IUCN Categories == | | == IUCN Categories == |
|
| |
|